Searching . . .
Jazz up your cars with our chrome axles. Steel axles are nickel coated to create a finished look for race cars – plus the slick surface decreases the amount of friction produced. 1/8" x 70 mm.
If you want to make holes at a uniform angle and depth in wood, metal, or synthetics, a drill press is the tool you absolutely must have.
The 10" Bench Drill Press is bolted or clamped to the top of a bench or stand and is perfect for smaller jobs. It has a single-phase, 1/4 hp, 115-volt, 60 Hz motor; five spindle speeds for drilling into a variety of materials; 1/2-inch chuck for use with most larger drill bits; a table that tilts 45° right and left for accurate angle drilling; and a simple depth-stop adjustment for repetitive drilling operations.
For bonds of steel, Finish-Cure Epoxy is the adhesive to call! A general-purpose adhesive, this low-odor epoxy is fully cured after eight hours and can be sanded easily. Can also be used to prepare wood surfaces for primer and paint.
Use this bottle for your rocket’s body.
Fits on the Pitsco LaunchGuard System for when you need to launch larger rockets.
The Sensor Extension Cable extends the length available for creating connections from the TETRIX® PRIZM™ Robotics Controller to a sensor. Each cable is 30 cm long.
Great for homemade launch systems.
This six-inch propeller assembly includes plastic propellers, propeller adapters, and eyelet hooks to securely hold string or a rubber band. Everything you need for the nose of your model airplane!
This propeller can be used with the following planes:
The gray Craftsman 2.5-amp 9" band saw makes easy work out of complex cuts with a roomy 9" throat. Easily adjust the height up to 3-5/8" for the perfect cut to your chosen piece of soft or hard wood. A powerful 1/4 hp 2.5-amp motor works consistently at 2,460 rpm so you get the job done quickly. For professional or DIY projects, this band saw is the way to go.
The band saw is built to give you a spacious feel as you work. It has a square work table that can tilt up to 45 degrees. The rack and pinion table is controlled and sturdy. Change blades quickly with a quick release after you cut precisely using the bearing blade guides and sliding miter guide. Getting traction is never an issue with the built-in tire-cleaning brush, and you can see your work clearly at all times with the upper blade-tracking window. Blades that are 1/8" to 3/8" wide by 62" diameter fit the new benchtop saw. Assembly is required.
Holds eight AA batteries.
These durable plastic holders come in either a one, two, three, or four AA-battery holder.
If you use the one-battery holder, the output will be 1.5 volts. If you use the two-battery holder, the output will be 3 volts. The three-battery holder puts out 4.5 volts and the four-battery holder output will be 6 volts. If necessary, these can be used on a cloudy day to test your Junior Solar Sprint cars. Just hook up the batteries and test your solar vehicle without the Sun!
For small robots, electric cars, and other motorized projects, our Battery Holders will come in handy. Holding either two, three, or four AA batteries, they have their own switches, so the motorized object doesn’t need one. And, they come with leads and a removable cover.